Can't compile on Debian Jesse

Hi,
I'm sorry to post again, but I was wondering if you could confirm that this is a YACReaderLibrary Server problem and not a problem of my installation.
Thank you.

I use YACReaderLibraryServer on a daily basis, so I think that it is not an issue with YACReaderLibraryServer.

Please, create a new folder and put a couple of comics inside it. Then create a library in that folder using YACReaderLibraryServer. After that, go to the initial folder and zip the hidden folder ".yacreaderlibrary". Send it to me so I can see what is going on there. I will neet the full path to that folder too, f.e. /mount/external/MyComicsTest.

Here is the zip:
www.dropbox.com/s/lepgjgvqvrrdu2w/yacreaderlibrary.zip?dl=0
The full path to the folder is Here is the terminal:
Thank you for your help.

Thank you for your help. For some reason the comics are imported storing the wrong path in the database...

I have compiled and tested YACReaderLibraryServer creating a new library and it is generating the right information. Tested in Raspbian and Windows 10.

What version of Qt are you using?

AnMartini, are you creating the library using a relative path?


Try with something like this:

Hi AnMartini,

could you test something for me? Please remove all you libraries using "YACReaderLibraryServer remove-library library" and then recreate them using full paths, i.e something like:

After that, please check if these libraries are working for you.

Just in case, remove manually .yacreaderlibrary hidden folder from /home/pi/ComicsTest/ too.

Hi, finally i reached to make it working on Raspberry Pi 3

YACReaderlibraryserver create-library MyComics "/home/pi/MyComics"

The created .yacreaderlibrary is owned by root and I changed it by owner pi:

sudo chown -R pi:pi .yacreaderlibrary

And then launched with

sudo YACReaderlibraryserver start MyComics

---

Here is all the procedure to install YACReaderlibraryServer on Raspberry Pi:

# 1- Install last version of Raspbian from www.raspberrypi.org/downloads/raspbian/ and create a microSD card following the installation guide on the page

# 2- From a console in Raspbian or by SSH (I used Putty from a PC with username: pi, password: raspberry)
sudo raspi-config (from the Menu) and Expand Filesystem + Finish and reboot

# 3- After rebooting, from a console type:
sudo apt-get update

# 4- Install Qt5 and Dependencies
sudo apt-get install -y -q mercurial qt5-qmake qt5-default qtbase5-dev
sudo apt-get install -y -q libpoppler-qt5-dev qtscript5-dev
sudo apt-get install sqlite3 libsqlite3-dev

# 5- Download yacreader source files
mkdir ~/yacreader
hg clone bitbucket.org/luisangelsm/yacreader ~/yacreader

# 6- Install libunarr library from source
cd ~/yacreader/compressed_archive/
wget github.com/selmf/unarr/archive/master.zip
unzip master.zip
# 6- or Install libp7zip library from source
# cd ~/yacreader/compressed_archive/
# wget sourceforge.net/projects/p7zip/files/p7z...20.1_src_all.tar.bz2
# tar xvf p7zip_9.20.1_src_all.tar.bz2
# mv p7zip_9.20.1_src_all.tar.bz2 libp7zip

# 7- Make and install YACReaderLibraryServer
cd ~/yacreader/YACReaderLibraryServer
# If 7zip
# qmake YACReaderLibraryServer.pro CONFIG+=7zip CONFIG+=standalone_server
# if unarr
qmake YACReaderLibraryServer.pro

make
make install

# 8- Create library with name MyComics and in directory /media/pi/MyComics/
sudo YACReaderLibraryServer create-library MyComics /media/pi/MyComics/

# 9- Change owner of .yacreaderlibrary to pi
cd /media/pi/MyComics/
chown -R pi:pi .yacreaderlibrary

# 10- Launch Server with library LibName
sudo YACReaderLibraryServer start LibName &

I hope this will help people install on Rasberry.
To do: mount a NAS on rasberry and make working the library from NAS

Thanks to all for helping, Enjoy.

HA! Great

I was just about to write in your thread to ask you to retry creating the library using absolute file paths. Any idea how you endend up having .yacreaderlibrary owned by root?

Word of advice regarding NAS - this can be tricky. We have been having more than one user complaining about issues with this combination. If you run into problems, add the mount option "nolock" to your network share, this should take care of it.